drywall installer
Verified
This job was posted directly by the employer on Job Bank.
Posted on
May 23, 2024
by
Employer details
1907334 Ontario LTD
Job details
Education: No degree, certificate or diploma. Work site environment: At heights. Dusty. Noisy. Work setting: Various locations. Tasks: Apply successive coats of compound and sand seams and joints. Apply, level and smooth coats of plaster. Clean and prepare surfaces. Cut and install metal corner beads to protect exterior corners. Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings. Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife. Finish corners and angles and create decorative designs in finish coat, if required. Measure, cut, fit and install drywall sheets. Mix plaster ingredients to desired consistency. Mould and install ornamental plaster panels, cornices and trim. Position and secure sheets to metal or wooden studs or joists. Smooth out excess compound and allow coat to dry. Spray acoustic or texture materials over walls and ceilings. Tape over joints using taping machine and embed tape in compound. Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces. Attach metal or gypsum lath to studs or furring. Cut openings in lath for heating and ventilation piping, ducts and electrical outlets. Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath. Install corner beads and wire mesh around beams to which plaster is to be applied. Install exterior and interior steel studs. Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools. Install vapour barriers and thermal and sound insulation. Prepare wall and ceiling layouts. Utilize laser alignment system. Work at heights, on scaffolding or swing stages. Erect and install scaffolding, falsework and other working platforms. Read and interpret blueprints, maps, drawings and specifications. Transportation/travel information: Own vehicle. Work conditions and physical capabilities: Bending, crouching, kneeling. Hand-eye co-ordination. Handling heavy loads. Large workload. Overtime required. Physically demanding. Repetitive tasks. Standing for extended periods. Tight deadlines. Work under pressure. Weight handling: Up to 45 kg (100 lbs). Own tools/equipment: Hard hat. Steel-toed safety boots. Personal suitability: Dependability. Reliability. Team player. Experience: 1 year to less than 2 years.
-
LocationBrampton, ON
-
Salary$30.00 to $35.00HOUR hourly (To be negotiated) / 40 hours per week
-
Terms of employment
Permanent employmentFull time
-
Day, Evening, Weekend, Overtime, To be determined, Early Morning, Morning
- Start date
Starts as soon as possible
- vacancies
2 vacancies
- Source
Job Bank
#2930063
Overview
Languages
English
Education
-
No degree, certificate or diploma
Experience
1 year to less than 2 years
Work site environment
Work setting
Responsibilities
Tasks
-
Apply successive coats of compound and sand seams and joints
-
Apply, level and smooth coats of plaster
-
Clean and prepare surfaces
-
Cut and install metal corner beads to protect exterior corners
-
Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
-
Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
-
Finish corners and angles and create decorative designs in finish coat, if required
-
Measure, cut, fit and install drywall sheets
-
Mix plaster ingredients to desired consistency
-
Mould and install ornamental plaster panels, cornices and trim
-
Position and secure sheets to metal or wooden studs or joists
-
Smooth out excess compound and allow coat to dry
-
Spray acoustic or texture materials over walls and ceilings
-
Tape over joints using taping machine and embed tape in compound
-
Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
-
Attach metal or gypsum lath to studs or furring
-
Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
-
Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
-
Install corner beads and wire mesh around beams to which plaster is to be applied
-
Install exterior and interior steel studs
-
Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
-
Install vapour barriers and thermal and sound insulation
-
Prepare wall and ceiling layouts
-
Utilize laser alignment system
-
Work at heights, on scaffolding or swing stages
-
Erect and install scaffolding, falsework and other working platforms
-
Read and interpret blueprints, maps, drawings and specifications
Additional information
Transportation/travel information
Work conditions and physical capabilities
-
Bending, crouching, kneeling
-
Hand-eye co-ordination
-
Handling heavy loads
-
Large workload
-
Overtime required
-
Physically demanding
-
Repetitive tasks
-
Standing for extended periods
-
Tight deadlines
-
Work under pressure
Weight handling
Own tools/equipment
-
Hard hat
-
Steel-toed safety boots
Personal suitability
-
Dependability
-
Reliability
-
Team player
Who can apply to this job?
The employer accepts applications from:
- Canadian citizens and permanent or temporary residents of Canada.
- Other candidates with or without a valid Canadian work permit.
Advertised until
2024-06-22
Important notice: This job posting was posted directly by the employer on Job Bank. The Government of Canada has taken steps to make sure it is accurate and reliable but cannot guarantee its authenticity.
Report a problem with this job posting
Thank you for your help!
You will not receive a reply. For enquiries, please contact us.